Home
About Us
Products
News dynamics
Contact Us

Tension clamp of product brief introduction

Release time:

2021-05-12 08:52

Product Introduction:

Strain clamp (tension clamp,strain clamp,dead-end clamp) refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string group or tower.

Strain clamp according to the different structure and installation conditions, can be roughly divided into two categories. The first category: the tensile clamp shall bear all the tensile force of the conductor or lightning conductor, and the grip force of the clamp shall not be less than 90 of the rated tensile force of the conductor or lightning conductor to be installed, but it shall not be used as a conductor. This kind of wire clamp can also be removed after the installation of the wire, and used separately. This kind of clamp has bolt type tension clamp and wedge type tension clamp, etc. The second category: strain clamp in addition to bear all the tension of the wire or lightning wire, but also as a conductor. Therefore, once this kind of clamp is installed, it can no longer be removed, also known as dead wire clamp. Because it is an electrical conductor, the installation of the clamp must be carried out carefully in accordance with the relevant installation procedures.

The advantages of using a tension clamp:

1. Effectively prevent short-circuit accidents caused by small animals such as birds and animals or foreign bodies overlapping;

2. Prevent electrical accidents caused by condensation, foul flashing, and icicles sticking to snow;

3. Prevent acid rain, salt spray and harmful chemical gases from corroding the incoming and outgoing lines of the transformer;

4. Avoid personal injury caused by pedestrians mistakenly touching exposed electrical contacts.

Anti-halo ring of product introduction

Why should hot galvanizing be used for surface treatment of power fittings?

Anti-halo ring of product introduction

Why should hot galvanizing be used for surface treatment of power fittings?

Related News

Safety production training

Shandong Haihong power equipment safety training conference, mainly on the optical cable hardware workshop and iron accessories workshop safety production situation is analyzed.

2024/05/31 16:36

See how Haihong's National Day is spent.

On September 30, under the leadership of the company's manager Kong, all the company's administrative staff filmed a video celebrating the 70th anniversary of the National Day in the company's factory area. Under the leadership of Manager Kong, everyone was passionate and actively cooperated. The entire video was filmed and it took less than 30 minutes to achieve the desired effect.

2019/10/06 01:16

Congratulations on the establishment of Shandong Haihong Power Group

Shandong Haihong Electric Power Group is the production and customization of optical cable fittings and iron accessories. Main Products Tensile Wire Clamp Suspension Wire Clamp Remaining Cable Frame Lead Wire Clamp Coupling Box Shock-proof Hammer Shock-proof Whip Safety Backup Wire Clamp Coupling Strip Full Tension Coupling Strip Cross Bars Holding Hoop Transformer Bench, etc.

2020/04/24 15:51

Shandong Haihong Safety Training

Today is the last day of 2020. The 2020 has passed and the new year will begin immediately. In order to facilitate the better and safe development of next year's work, the company organizes all workshop personnel to carry out safety education and training.

2020/12/31 16:36

< 1 2 3 4...12 >

Tel : +8615715379122

Fax : +86-537-5052257

Sales Department : +86-15715379122( Mary )

Add : West Industrial Road, Yingbin Avenue, Qufu City, Shandong Province (North West Road, Confucius Avenue)

WeChat Contact